"HAVEN" - BUCKEYE BURL WOOD & JASPER WEDDING BAND - TITANIUM - SIZE 11 1/4

$374.00 $444.00

GOOD NEWS! Same Beautiful Rings - Discounted Price - Ships In Days Not Weeks!

As a matter of principle each of our rings is custom made to order, according to our clients size and designs specifications. Because of this, and high demand, our current lead time is 6-8 weeks on any commissioned ring. However, over the years many of our clients have ordered incorrect sizes and sent rings back for a new size. These "Homeless" rings are now available at a discounted rate & will ship within a week rather than 6-8 weeks!!

If you add a ring or box engraving to your order please keep in mind that may add a few extra days to your ship date.

We love taking on custom orders. If you have your own idea for a design reach out to us in the contact section of the website, we want to make something as unique and special as the love you have found.

Because we use natural and unique materials in our rings, variation must be expected. No two rings will look the same, each piece of wood, antler, copper, etc... will have unique patterns, grains, colors, etc..

Started from raw materials, each ring is a multi-day process and is made just for you. To ensure a good fit, we recommend being sized by at least 2 jewelers, using rings that are similar to the width that you plan on ordering from us, NOT the thin key chain ring sizers sometimes used by jewelers. Wider rings will not fit in the same size that thin rings do.

The rings cannot be resized without being completely remade. For this reason refunds and remakes can not be given if a ring is ordered in the wrong size, however a discounted remake fee can be made available. If you take the time to try on rings in the width you will be ordering we are confident that the ring we craft you will fit perfectly.

  • 3 Weeks: Rings set in Titanium, Black Zirconium, Damascus Steel, or Tungsten (*If the ring contains any Silver or Gold the production time is 6 weeks)
  • 6 Weeks: Any ring containing Silver or Gold
  • 8 Weeks: Women's engagement rings & any ring with precious stones
  • 8-10+ Weeks: Fully custom rings always have the possibility of taking longer than 8 weeks from the time the order is placed. Designing a custom commissioned ring takes time and extra care to ensure we can make the ring you have envisioned come to life. This extra time accounts for sourcing custom stones, new materials, CAD design, or the custom casting of an original design and the complexity of that design

Before we start crafting your ring, we want to give you a white glove sizing experience that is unlike anything you will get from another online jeweler because you deserve the confidence in knowing that your ring will fit perfectly! With Staghead Designs, you will receive a box containing stainless steel rings ranging in half sizes from size 4 to 14. These rings are made in a similar width and interior fit as the ring we will be making for you, giving you an accurate method to discover the perfect size for your ring.

Our sizing kit is offered as a FREE option with every ring purchase and can be added to your order by selecting the "Free Ring Sizing Kit" option under the "Ring Size Or Free Ring Sizing Kit" dropdown menu during checkout.

*Please note that choosing our ring sizing kit will delay the production of your ring as we cannot start production until you send us confirmation of your final size.*

If you are getting sized locally it is extremely important to follow our sizing guidelines to ensure a perfect fit! Please click HERE for additional information on this process and to read the fine print on all of our sizing policies and guidelines.

CLICK HERE TO VIEW OUR FULL SIZING GUIDELINES

TUNGSTEN RINGS ARE ONLY AVAILABLE IN COMFORT FIT

WIDE RINGS (6mm-10mm wide):
We recommend being sized using standard fit rings (not comfort fit) that are the same width as the ring you would like to order from us. Most of our wide rings default to 8mm wide. Please do not use the thin sizing rings that jewelers have as these are not accurate and an actual ring will be tighter (because of added width) than the sizing rings that are used. While we use our own method to create comfort of wear on our rings, it is different than what is referred to as "comfort fit" at most jewelry stores. For this reason, try on standard fit rings. We provide a beveled-cut edge and will thus be more comfortable to the wearer than a typical standard fit ring. Lastly, do not allow a jeweler to give you a size according to a ‘ring-sizing dowel’, as in our experience they can measure differently and can vary based on how the jeweler was trained to read it. A ring can be off by a half size or more, depending on the dowel.

NARROW RINGS (1mm-5mm wide): We recommend being sized using rings that are the same width as the ring you will be ordering in, if at all possible. If a matching width is not available at the jewelers we have also found that the thin key ring sizers are typically very accurate for rings made in a 1mm-5mm width. 

COMFORT FIT RINGS: Request to be sized using comfort fit bands (not standard fit) that are at least 6mm wide. This is only applicable for TUNGSTEN ring bases. 

*Our tungsten rings, which are 8mm wide, can only be ordered in half size increments from size 7 to 13 1/2. The widths cannot be changed on any tungsten rings.

LOCAL JEWELER

If you would like to be sized locally, we recommend getting sized by two or three reputable jewelers following our guidelines here, depending on if the ring you ordered is a narrow band or a wide band. Please note that our rings are true to international sizing standards, listed below, and our acceptable tolerance on every ring is +/- a tenth of a millimeter.

CARE GUIDELINES

Men’s/Unisex Rings

Because many of our rings have natural materials in them (such as wood, antler, etc.) they do require more care than a traditional solid gold wedding band. We recommend you remove your ring for:

- Any water exposure (including handwashing)
- Using household chemicals, hand sanitizer, or any other harsh chemicals
- Any manual labor
- Anything that might incur impact damage such as hitting your ring on hard surfaces or dropping it

Engagement Rings

- Remove your ring for any manual labor (especially anything that includes gripping items tightly such as furniture, free weights, etc.)
- Remove your ring when using cosmetics, household chemicals, hand sanitizer, or any other harsh chemicals

Click here to view our full care guidelines for all of our rings.

Returns & Exchanges

We do accept returns and exchanges as long as the ring is returned within 30 days of receiving it, and is returned in perfect condition. Please email us for instructions on sending the ring in!

Custom rings are final sale and may not be returned for any portion of a refund or store credit. “Custom” means altering the ring in any way from the listing you purchased it from including altering the width of the ring, changing the materials, adding a custom ring engraving, etc.

Completed services such as ring engravings, rushes, etc. will not be refunded or credited.

*Staghead Designs reserves the rights to any design created for a client and may post or share that design publicly as well as list the ring on our website for purchase*

Miscellaneous: 

Please note that because we use natural materials in our rings (such as wood, antler, etc.) there WILL be variation in how the color and grain of the materials in your ring turn out. No two rings will look the same!

The interior of all eligible rings will be engraved with our antler logo and the metal type of the ring you are purchasing.

If purchasing a stone from the Staghead Mine please note that we do not send the loose stone and all sales are final.

Click here to view our full policies on returns, exchanges, and production times.

All engravable items have a default font listed. Follow Staghead Designs’ Font List below for all other acceptable fonts.
Ring Engravings
  • Maximum Character limit of 30.

  • Not all ring designs, including engagement rings, can be engraved.

  • Default font Tahoma.

    Box Engravings
    • Maximum Character limit of 30.

    • Default font Allura.

      Knife Engravings
      • Maximum Character limit of 3

      • Engraving location needs to be specified handle or blade, not all engraving locations are available on all knives.

      • Default font Bell MT

        Hatchet Engravings
        • Maximum Character limit of 12

        • Can be engraved on one or on both sides of the handle.

        • Default font Rosewood

          Lighter Engravings
          • Maximum Character limit of 15

          • Can be engraved on the front, non-hinge side, and/or back of the lighter.

          • Default font Tahoma

            Cufflinks Engravings
            • Maximum Character limit of 3

            • Engraving size and location may vary depending on material with natural variations.

            • Default font Times New Roman

            Engravable Key Necklace
            • Maximum Character limit of 3

            • Default font Tahoma

            Engravable four-sided vertical bar necklace & Single diamond bar necklace
            • Maximum Character limit 10

            • Default font Tahoma

            Staghead Designs Font List

                Image Engraving Requirements and Restrictions

                Ring, Ring Box, and Lighter Engravings
                • Images need to be a solid black silhouette or well defined solid black line art.
                • Please upload a vector image with the file types .svg, .ai, or .eps.
                • A .pdf is also an acceptable file type only if the file contains a vector image.
                • Any other image types submitted or images lacking sufficient quality will be subject to additional fees.
                • Keep in mind that the image submitted will need to be sized and scaled to the product being engraved.

                  Example of solid black silhouette vector image

                  Example of solid black line art vector image